Members Downloads
Download Manager
TC11 discuses advanced refractory materials and worldwide industrial experience on glass melting furnaces.
The material properties and application problems are reported and analyzed.
Testing procedure and inspection methods for refractory materials will be recommended.
Activities and planned actions
Meeting
October 2014 in Düsseldorf, Germany.
October 2015 in Eindhoven, Holland.
September 2016 in Düsseldorf, Germany.
October 2017 in Istanbul, Turkey
October 2018 in Düsseldorf, Germany
October 2019 in Venice, Italy
October 2020 in Düsseldorf, Germany
Presentation
2014
Amul Gupta and Michael Dunkl: Bubble formation by AZS-refractories during startup of glass melting furnace.
Kevin Selkregg: Glass defect in glass melting tanks by AZS-refractories.
Burak Izmirlioglu: Refractories, Glass Defects and Post Mortem Works:
2015
Jean-Pierre Meynckens: Effect of pet coke on refractories in glass furnace.
Michel Gaubil: Diverse industrial experience in glass furnace using pet coke.
Rongxing Bei: Regenerator Lining Concept under Pet-Coke Firing.
Stef Lessmann: Experimental device to test the refractories for regenerators.
2016
Rongxing Bei: DURITAL AZ58 and DURITAL K99 EXTRA for the Superstructure of Glass Melting Furnaces.
Johannes Vetter: Thermochemical Regenerator – High Efficiency Heat Recovery for Oxy-Fired Glass Furnaces.
Anne Jans Faber: Project proposal – Reducing structural heat losses at glass Furnaces.
Anne Jans Faber: New CelSian CO+ sensor for burner control.
Marvin: The production at Ling Nan refractories, China and the quality control.
2017:
Sven-Roger Kahl (Ardagh Glass): The new requirements for refractories for multi-fuel hybrid furnaces
Bruno Malphettes (SEFPRO): superstructure corrosion
Rongxing Bei (RHI): Overview of all possible refractories for crown and superstructure
Burak Izmirlioglu (Sisecam): The crown and superstructure refractories and glass defects
Simone Tiozzo (Stazione Sperimentale del Vetro): The glass defects from crown and superstructure
Esref Aydin (Ex TC11 Chairman): Catscratches and Cords
AnneJans Faber (Celsian): Methods and tools to study crown corrosion and heat losses of refractory walls
2018
Evaluation of different test methods for blistering
– Roland Heidrich (REFEL, Italy)
– Brian Harris (NSG, UK)
– Christian Kunert (Schott, Germany)
– Kenji Matano (AGCC, Japan)
2019
Evaluation of silica testing methods:
– Presentation: Stefano Cappuzzo, Stefano Sanchetti (SSV)
– Presentation: Andrea Roncaglia (AGC)
– Presentation: Anne Jans Faber, Marco van Kersbergen (Celsian)
Worked out a silica RRT program:
– All members
Mixes
-Presentation: Refractory mixes for glass industry, Mark Taylor, Santiago Suarez (Magneco/Metrel)
Next steps:
– Influence factors for blistering: study on impurities, oxidation stage of the fused cast materials
– Evaluation of new test methods for refractory materials
Next Meeting:
Original plan: Monday, October 19th, 2020 in Düsseldorf, Germany.
Postponed to: Monday, June 14th, 2021 in Düsseldorf, Germany.
Committee Members
Meynckens, Jean-Pierre (AGC) Committee Position: Chair
Gaubil, Michel Committee Position: Vice Chair
Dunkl, Michael
Van Kersbergen, Marco (Celsian)
Fleischmann, Bernhard
Gaubil, Michel
Harris, Brian
Heidrich, Roland (Dr.-Ing.)
Izmirlioglu, Burak
Tojo, Shin (NEG)
Kunert, Christian
Matano, Kenji
Sanchetti, Stefano
Schmitt, Gerhard
Zborowski, Janusz
Stefan Postrach (RHIM)
Committee Contact Details
TC11: Materials for Furnaces