Members Downloads
Download Manager
2013 Eindhoven
2014 Aachen
2014 Parma
2015 Bilbao
2015 Eindhoven
2016 Offenbach
Annual Reports
The objectives of this new TC are:
To identify the major process steps, with potential for energy efficiency improvement e.g. glass melting, glass conditioning, raw material supply & recycling, post-processing of glass;
To select technologies with potential for efficiency improvement;
To test or develop tools to that support energy efficiency investigations (e.g. energy balance models for glass furnaces, protocols for energy management, energy audit procedures dedicated to glass production plants, LCA modeling).
To define research activities for developing energy saving glass production methods.
To organise symposia or sessions on energy efficiency in glass production at ICG annual meetings and congresses;
To share energy consumption and CO2 emission data (anonymous) for benchmarking purposes;
To share LCA data;
And to share practical experiences and problems related to new energy saving technologies (e.g. use of batch preheating, flue gas heat recovery systems, energy efficient furnace designs, recycling etc.).
Activity 2019
Energy Efficiency in Glass Production (TC09) – Annual report 2019
Chairman: Hans van Limpt
Vice-Chair: Wolfgang Schmidbauer
Secretary: Erik Muijsenberg
Webmaster: Hans Mahrenholtz
Members:
Emre Dumankaya
Bernhard Fleischmann
Roel van Herten
Gustav Huuskens
Sven-Roger Kahl
Andrew Keeley
Simone Tiozzo
Toru Hasegawa
Yudai Katagami
Oscar Verheijen
Fabrice Fasilow
Hiroyuki Itazu
Daisuke Momo
Richard Hulme
Wolf Kuhn
SUMMARY
The aim for 2019 was to continue to define a uniform approach to define energy efficiency or specific energy use within or across the various glass industry sectors. The existing non-uniformity is compounded by the fact that there is no common approach in the consideration of factors such as the effect of cullet, the efficiency of electric boosting, age, furnace design etc.. Furthermore reported energy data in literature do not clearly explain the validity of the reported data. In first instance TC09 is focussing on glass melting furnaces, the largest energy consumers of a glass factory.
TC09 will develop recommended Best Practices for defining energy use and efficiency so that companies within each glass sector can make useful comparisons. This approach will be used to explain some of the differences in performance between sectors and aid discussions with non-technical and/or external agencies.
The results of this project will be used to explain the energy balances of glass furnaces and to evaluate the methodology of applied energy balance models, measuring techniques and benchmark data. The first step in this study is an energy benchmark study for 6 to 8 float glass furnaces. In this study glass furnace energy consumption of individual glass furnaces will be benchmarked against a database of energy consumption of (anonymous) glass furnaces. We have received active contributions from AGC, Sisecam, NSG and at start Guardian. At the last meeting in Boston AGC once more added a presentation of making a good thorough furnace heat balance (following an earlier presentation in Yokohama). Maybe good to mention the active members in this project?
TC9 Started a round robin comparison of calculating the Thermodynamic Energy Requirement for glass melting for some selected glasses. The simulations are performed by HVG and Sibelco.
Besides this study on the definition of energy efficiency, TC09 exchanged information on running projects and new initiatives to reduce energy consumption in the glass production process. Many companies apply energy benchmark studies as a starting point of energy reduction programs. To reduce the CO2 footprint and energy consumption some companies switched from air-fuel to oxy-fuel, while others increased the fraction of electric boosting. New initiatives in the glass industry are for example the application of Organic Rankine Cycle (ORC), Hot-Ox systems to preheat fuel and oxygen, the application of the ‘Optimelt’ TCR system and the use of smart batches which melt more easily.
Activities in 2019
1. TC09 Meetings
In 2019 one TC09 meeting was was organized
During the ICG Boston conference there was held a TC9 meeting with International and American participants discussing different topics, paper and having a detailed presentation from some customers such as NEG (Hiroyuki Itazu), AGC (Fabrice Fasilow)
Agenda points in Boston were:
- General introduction and welcome
- Minutes Yokohama Sunday 23.9.2018
- ICG issues
- ICG 2030 project
- Poster
- Contributions of members
- Feedback GlassTrend study tour hydrogen combustion – Oscar & Erik/Wolfgang
- 10 – 15 minutes member contributions.
- Fabrice Fasilow AGC
- Hiroyuki Itazu, NEG
- Discussion on the Energy paper status
- SSV study energy harmonization (depending on SSV attending)
- Thermodynamic simulations energy demand batches – update results
- Webmaster – Dropbox update. Upload presentations
- Any other business
- Next meeting
2. Energy benchmark project
As explained in the summary an energy benchmark project has been done for 6 float furnace with the aim to define a uniform approach to define energy efficiency or specific energy use within or across the various glass industry sectors. A draft publication is in progress.
3. Calculation of minimum thermodynamic batch melting energy
There is not a clear standard for what is the actual minimum amount of enthalpy (thermodynamic energy requirement) that is needed to melt a certain soda lime (Container) glass batch.
Several batches were defined and HVG and Sibelco calculated the minimum melting energy using a thermodynamic method developed by Conradt and tuned by HVG and the thermodynamic model FactSage 7.0 (applied by Sibelco).
Based on first results, the differences between both models are of the order of magnitude of 5 to 10%.
4. Exchange of information
A Dropbox folder has been opened on which most past and new information are uploaded to be shared with all active participants
TC09 exchanged information on running projects and new initiatives to reduce energy consumption in the glass production process.
5. Publications & Presentations
- Draft publication/paper of the Float Benchmark is in progress a first DRAFT is ready, but should be continued
- Poster at ICG conference Boston 2019: ‘Technical Committee 9: Energy Efficiency. Expert group of ICG for energy efficiency in glass production’
PLANS FOR 2020 AND DELIVERABLES
- Organization of 1 or 2 meetings in 2019.
- Annual meeting is planned in at the ESG/ICG in Krakow Poland (sept 2020)
- Finishing publication of energy benchmark project for float furnaces.
- The paper also will address how energy efficiency is related with glass quality
- Execution of calculating minimum thermodynamic melting energy for more batches
- ICG has awarded a budget to TC09 that was first given to SSV to make some better definition of energy efficiency, finally SSV did not find the time. Now Hans Mahrenholtz from GS will work on it.
- Exchange of information on running projects and new initiatives to reduce energy consumption in the glass production process
Activities and planned actions in 2017
Introduction
As a result of the very comprehensive ICG roadmap activities, the ICG has launched a Technical Committee addressing the need to focus on energy efficient glass production in order to decrease greenhouse gas emissions and primary energy consumption in industrial glass production. Its name is TC09: Energy Efficiency in Glass Production. The aim is to bring experts together to discuss the energy saving potential and energy saving technologies available for all steps in the process of industrial manufacturing (from raw materials to glass product) and for all glass sectors.
TC09 has been active since November 2013.
The main direction of this TC is to define activities and studies of a technical and scientific nature. The most important suggestions proposed include:
– Investigations of new technologies applicable for energy efficiency improvement in glass production;
– Sharing experiences with application of new energy saving technologies or energy recovery from waste heat;
– Development of tools and models to investigate energy balances of glass furnaces & forehearths or other thermal processes in glass industries;
– Collection of data on energy consumption in glass industries per country and per process step or furnace (benchmarking);
– Organize symposia or sessions on Energy Efficiency or Energy Saving Technologies at conferences;
– Preparing guidelines to standardize methods of analysing energy efficiency of glass production and setting definitions for units of energy consumption, specific energy consumption and defining reference states.
TC09 will address all process steps, but the first priority will be glass melting, since this contributes on average about 60-65 % to the total energy consumption in glass production.
TC09 will become part of the Glass Production TC cluster of the ICG and will work alongside: TC11, TC13, TC14, TC18, TC15/21, and TC23. TC09 is chaired by Dr. Ing. Hans van Limpt from CelSian Glass & Solar. Soon a vice-chair, secretary and webmaster will be nominated and proposed. TC09 aims to set up a website and wants to cooperate with other TCs within the cluster especially TC13 (Environment) and TC18 (Glass Melting).
The most important aim for 2017 is to continue to define a uniform approach to define energy efficiency or specific energy use within or across the various glass industry sectors. With financial support of ICG, TC09 started a project to realize this goal. The existing non-uniformity is compounded by the fact that there is no common approach in the consideration of factors such as the effect of cullet, the efficiency of electric boosting, age, furnace design etc.. Furthermore reported energy data in literature do not clearly explain the validity of the reported data. In first instance TC09 is focussing on glass melting furnaces, the largest energy consumers of a glass factory.
TC09 will develop recommended Best Practices for defining energy use and efficiency so that companies within each glass sector can make useful comparisons. This approach will be used to explain some of the differences in performance between sectors and aid discussions with non-technical and/or external agencies.
The results of this project will be used to explain the energy balances of glass furnaces and to evaluate the methodology of applied energy balance models, measuring techniques and benchmark data. The first step in this study is an energy benchmark study for 6 to 8 float glass furnaces. In this study glass furnace energy consumption of individual glass furnaces will be benchmarked against a database of energy consumption of (anonymous) glass furnaces.
TC9 Started a round robin comparison of calculating the Thermodynamic Energy Requirement for glass melting for some selected glasses.
Besides this study on the definition of energy efficiency, TC09 exchanged information on running projects and new initiatives to reduce energy consumption in the glass production process. Many companies apply energy benchmark studies as a starting point of energy reduction programs. To reduce the CO2 footprint and energy consumption some companies switched from air-fuel to oxy-fuel, while others increased the fraction of electric boosting. New initiatives in the glass industry are for example the application of Organic Rankine Cycle (ORC), Hot-Ox systems to preheat fuel and oxygen, the application of the ‘Optimelt’ TCR system and the use of smart batches which melt more easily.
Activities in 2017
1. TC09 Meetings
In 2017 three TC09 meetings were organized.
The first was a SKYPE conference call on 17 May 2017.
The 2nd was a SKYPE call on 31 August 2017.
The 3rd meeting was held at ICG Conference in Istanbul, Turkey on 20 December 2017.
The meetings were attended by about 10 to 20 (guest-) members.
2. Energy benchmark project
As explained in the summary an energy benchmark project has been done for 6 float furnace with the aim to define a uniform approach to define energy efficiency or specific energy use within or across the various glass industry sectors. A draft publication is in progress.
3. Calculation of minimum thermodynamic batch melting energy
There is not a clear standard for what is the actual minimum amount of enthalpy (thermodynamic energy requirement) that is needed to melt a certain soda lime (Container) glass batch.
Several batches were defined and HVG and Sibelco calculated the minimum melting energy using a thermodynamic method developed by Conradt and tuned by HVG and the thermodynamic model FactSage 7.0 (applied by Sibelco).
Based on first results, the differences between both models are of the order of magnitude of 5 to 10%.
4. Exchange of information
A Dropbox folder has been opened on which most past and new information are uploaded to be shared with all active participants
TC09 exchanged information on running projects and new initiatives to reduce energy consumption in the glass production process.
Hans van Limpt and Sven Kahl visited Glass Alliance Europe to explain the activity of TC09 to them.
A storyboard discussion to prepare the publication is planned for 2018.
5. Publications & Presentations
- Draft publication of the Float Benchmark is in progress
PLANS FOR 2018 AND DELIVERABLES
- Organization of 1 or 2 meetings during 2018.
- First meeting will be held with core team during a special meeting focusing on CO2 reduction organized by Glasstrend 18-19 April Marktheidenfeld.
- Full annual meeting is planned in Asia during ICG Conference 23-26 September in Yokohama
- Finishing publication of energy benchmark project for float furnaces.
- Execution of calculating minimum thermodynamic melting energy for more batches
- Exchange of information on running projects and new initiatives to reduce energy consumption in the glass production process
Committee Members
Capilla, Xavier
Caputo, Alfeo
Dumankaya, Emre
Fasilow, Fabrice
Fleischmann, Bernhard
Hans van Limpt Committee Position: Chair
Hulme, Richard
Huuskes, Gustav
Itazu, Hiroyuki
Kahl, Sven
Keeley, Andrew
Kobayashi, Sho
Kuhn, Wolf
Laux, Stefan
Marostica, Andrea
Martin Garcia, Olga
Momo, Daisuke
Muijsenberg, Erik Committee Position: Secretary
Murthy, Valli
Ochoa, Diego
Roos, Christian
Schmidbauer, Wolfgang (Dr)
Sperry, Elmer
Tiozzo, Simone
van Herten, Roel (ir)
Van Limpt, Hans Committee Position: Chair
Verheijen, Oscar
Yoshida, Noriyuki
Committee Contact Details
TC09: Energy Efficiency
Application Development manager / Technical Sales Glass
De Zate 1
BE-2480 Dessel
Belgium
Tel: +32 14 83 72 36